PB82C1N001

Li-polymer / 400lm / 4.5h


400-lumen Sensor Bike Light, Auto Brightness Adjustment


Available in 1 colour
  • Auto Brightness Adjustment
  • Charging Status Indicator
Beam Pattern Simulation
  • Swivel Mounting Bracket
  • Tool-free Bracket
  • XP-G2 Cree White LED – Up to 400 Lumens
  • Multi-mode Operation: Auto Operation - Light Sensor Mode; Manual Operation – High, Med, Low, 6Hz & 3Hz Flashing
  • Light Sensor detects Environment Light and adjusts Brightness Automatically
  • LED Indicator on Switch shows Auto / Manual Operation, Battery Capacity & Charging Status
  • Die-casted Aluminium Front Cover for Heat Dissipation
  • 180° Side Visibility
  • Switch Protection – Long Press for ON/OFF
  • Gradual On/Off – Turns On/Off Gradually
  • Direct Plug to Recharge by Micro USB
  • Circuit Protection Prevents Battery from Over-charging or Over-discharging
  • 360° Swivel Bracket –Tool-free Mounting or Dismantle
  • Water Resistant
  • Operation

    [Long press for ON/OFF]
    [Click to cycle through lighting modes as follows]
    AUTO > HIGH > MED > LOW > 6Hz FLASHING > 3Hz FLASHING
    [At Auto Operation (Blue Indicator ON), brightness level will be adjusted automatically according to environment]
    [At Manual Operation, Green Indicator ON for a few seconds]

  • Battery Type

    Built-in 1 x 3.7V 1700mAh Li-polymer Rechargeable Battery [Included]

  • Charging Info

    3hrs Charging Time [DC5V 1000mA Input]
    Red LED ON – Charging
    Green LED ON – Fully Charged

  • Battery Cycle

    500 cycles (Reserves ~80% Capacity after 500 cycles)

  • Battery Power Indicator

    When it is in Auto Operation
    Indicator Blue LED ON – High Power
    RED LED FLASHING – Low Power

    When it is in Manual Operation
    Green LED ON [Auto OFF after few seconds] – High Power
    Red LED FLASHING - Low Power

  • Bulb Type

    1 x XP-G2 Cree White LED

  • Accessories

    Mounting Bracket [Fits 18–36mm Handlebar]
    Micro USB Cable

  • Size

    47mm x 74mm x 45mm [Without Bracket]
    47mm x 74mm x 96mm [With Bracket]

  • Weight

    140g [With Battery & Bracket]

ANSI
HIGH 400 Lumens 1650cd 80m 4h30min
MED 175 Lumens 750cd 55m 6h30min
LOW 55 Lumens 250cd 30m 25h
6Hz FLASHING* NA NA NA 13h
3Hz FLASHING* NA NA NA 13h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.