PHM0M1N036

Li-polymer or 2AA / 420lm / 3.25h


Spot and High CRI Flood lighting Headlight, Dual Fuel with Rec. Battery Pack or 2AA Alkaline Batteries


Available in 1 colour
  • spot beam ON
  • cri flood beam on
LINE UP
  • SEPARATED SWITCHES
  • Alkaline or Rechargeable Battery Pack Compatible
  • Luxeon V2 White LED – Up to 420 Lumens
  • 2 Separate buttons for Easy Operation of Spot & High CRI Flood beam
  • Projects Uncompromising Spot & High CRI Flood Beam
  • 5 Lighting Modes – SPOT HIGH, SPOT MED, SPOT LOW, FLOOD ON & FLOOD 3Hz FLASHING
  • Runs on either Li-polymer Rechargeable Battery Pack [Included] or 2pcs AA Size Alkaline Batteries [Not Included]
  • Direct Plug to Recharge Battery Pack by Micro USB
  • LED Indicator on Recharge Battery Pack shows Charging Status
  • Circuit Protection prevents Battery from Over-charging or Over-discharging
  • Replaceable Rechargeable Battery Pack as Backup Power
  • Rock-solid Protection
  • 2m Drop-proof
  • IP66 Dust Proof & High Pressure Water Resistant
  • Operation

    Press Separate Buttons enabling Independent Control over SPOT and High CRI Flood Beam Operation.

    SPOT Beam Operation
    SPOT HIGH > SPOT MED > SPOT LOW > OFF

    High CRI Flood Beam Operation
    FLOOD ON > FLOOD 3Hz FLASHING > OFF
    [Press OFF if stays at any mode over 5 seconds]

  • Battery Type

    1 x 3.7V 800mAh Li-polymer Rechargeable Battery Pack [Included] or 2 x 1.5V AA Alkaline Batteries [Not Included]

  • Charging Info

    2.5hrs Charging Time [DC5V 1000mA Input]
    Red LED ON – Charging
    Green LED ON – Fully Charged

  • Battery Cycle

    300 cycles (Reserves ~80% Capacity after 300 cycles)

  • Bulb Type

    1 x Luxeon V2 White LED
    1 x Flood High CRI Warm White LED

  • Accessory

    Micro USB Cable [Included]

  • Size

    72mm x 50mm x 45mm

  • Weight

    100g [With Rechargeable Battery Pack]

ANSI
SPOT HIGH 420 Lumens 3160cd 110m 3h15min
SPOT MED 220 Lumens 1570cd 79m 7h30min
SPOT LOW 30 Lumens 210cd 29m 23h45min
FLOOD ON 40 Lumens 17cd 8m 14h30min
FLOOD 3Hz FLASHING* NA NA NA 17h30min
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.