PLA0M4B001

4AA / 250lm / 10h


4AA-Cell Colour Changing LED Lantern, with Innovative Candle Light Mode


Available in 1 colour
  • BATTERY POWER INDICATION
  • As Downlight
LED Colour-Changing
  • Nichia Cool White LEDs & Warm White LEDs - Up to 250 Lumens
  • Colour Changing Outputs - Cool White, Natural White & Warm White
  • Smooth Dimming Control [HIGH - LOW Brightness] at Each Colour Output
  • Imitating Candle Light Flickering Mode
  • Battery Capacity Indication
  • Switch Protection - Long Press to Turn On
  • Gradual On/Off - Turns On/Off Gradually
  • Removable Cap allows Direct Illumination
  • Rubberized Handle secures Hold with Wet or Gloved Hand
  • Rubberized Housing enhances Impact Resistances
  • Built-in Recessed Hook at Lantern Base for Hanging as Downlight
  • Water Resistant
  • Operation

    [Long Press for ON]
    NATURAL WHITE ON > COOL WHITE ON > WARM WHITE ON > CANDLE LIGHT
    [At each ON mode, press and hold the Operation Button to cycle through HIGH to LOW outputs (blinks at minimum output), release any time for desired brightness]
    [Press OFF if stays at any mode over 3 seconds]

  • Battery Type

    4 x 1.5V AA Alkaline Batteries [Included]

  • Battery Power Indicator

    Shows Battery Power after Lantern being Turned ON
    Green LED ON - High Power
    Red LED ON - Medium Power
    Red LED FLASHING - Low Power

  • Bulb Type

    3 x 0.5W Nichia Cool White LEDs
    3 x 0.5W Nichia Warm White LEDs

  • Accessory

    Carabiner

  • Size

    Ø58mm x 130mm

  • Weight

    245g [With Batteries]

ANSI
NATURAL WHITE HIGH 250 LUMENS 90cd 19m 10h
NATURAL WHITE LOW 50 LUMENS 18cd 9m 50h
COOL WHITE HIGH 145 LUMENS 50cd 15m 18h
COOL WHITE LOW 30 LUMENS 12cd 7m 85h
WARM WHITE HIGH 110 LUMENS 40cd 13m 20h
WARM WHITE LOW 25 LUMENS 9cd 6m 90h
CANDLE LIGHT NA NA NA 45h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.