Handheld

Headlight

Lantern

Industrial Light

Bike Light

Gadget

PB82C1N002

Li-polymer / 630lm / 3h

630-lumen Sensor Bike Light, Auto Brightness Adjustment

Available in 1 colour
  • Click Mode Switch to Select Beam
  • Light Sensor Operation - Auto Brightness Adjustment
Beam Pattern Simulation
  • Swivel Mounting Bracket
  • Tool-free Bracket
Features -
Specifications +
ANSI +
  • XP-G2 Cree White LEDs - Up to 630 Lumens
  • Multi-beam Outputs for Wide-angle or Long-distance Vision
  • Multi-mode Operation: Auto Operation - Light Sensor Mode; Manual Operation - High, Med, Low, 6Hz & 3Hz Flashing
  • Light Sensor detects Environment Light and adjusts Brightness Automatically
  • 2 Easy Operation Switches: Mode Switch and Beam Switch
  • LED Indicator on Switch shows Auto / Manual Operation, Battery Capacity & Charging Status
  • Die-casted Aluminium Front Cover for Heat Dissipation
  • 180° Side Visibility
  • Switch Protection - Long Press for ON/OFF
  • Gradual On/Off - Turns On/Off Gradually
  • Direct Plug to Recharge by Micro USB
  • Circuit Protection Prevents Battery from Over-charging or Over-discharging
  • 360° Swivel Bracket - Tool-free Mounting or Dismantle
  • Water Resistant
  • Operation

    • Mode Switch
    [Long press for ON/OFF]
    [Click to cycle through lighting modes as follows]
    AUTO > HIGH > MED > LOW > 6Hz FLASHING > 3Hz FLASHING
    [At Auto Operation (Blue Indicator ON), brightness level will be adjusted automatically according to environment]
    [At Manual Operation, Green Indicator ON for a few seconds]

    Beam Switch
    [Click to select Beams]
    DOUBLE BEAMS > FOCUSED BEAM > WIDE BEAM

  • Battery Type

    • Built-in 1 x 3.7V 2550mAh Li-polymer Rechargeable Battery [Included]

  • Charging Info

    • 5hrs Charging Time [DC5V 1000mA Input]
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle

    • 300 cycles (Reserves ~80% Capacity after 300 cycles)

  • Battery Power Indicator

    • When it is in Auto Operation
    Blue LED ON - High Power
    RED LED FLASHING - Low Power

    When it is in Manual Operation
    Green LED ON [Auto OFF after few seconds] - High Power
    Red LED FLASHING - Low Power

  • Bulb Type

    • 2 x XP-G2 Cree White LEDs

  • Accessories

    • Mounting Bracket [Fits 18-36mm Handlebar]
    Micro USB Cable

  • Size

    • 47mm x 74mm x 45mm [Without Bracket]
    47mm x 74mm x 96mm [With Bracket]

  • Weight

    • 160g [With Battery & Bracket]

ANSI
HIGH 630 Lumens 3100cd 112m 3h
MED 300 Lumens 1230cd 70m 5h
LOW 100 Lumens 500cd 45m 15h
6Hz FLASHING* NA NA NA 15h
3Hz FLASHING* NA NA NA 15h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.

You may also like