AH82C1N010

Li-ion / 490lm


490lm Aluminum Rechargeable Headlight


Available in 1 colour
  • Dust Proof
  • Free Projection Angle
Diffuser Lens
  • Red Rear Light
  • Charging Status Indicator
  • 1 x Hi-Power White LED – Up to 490 Lumens for BOOST, 350 Lumens for HIGH
  • Tough Aluminium Headlight with Hard Case Rear Light
  • Simple One-Click Operation - BOOST, HIGH, MED, LOW & 8Hz FLASHING
  • Diffuser Lens for Smooth Wide Beam Light
  • Direct Plug to Recharge by USB-C
  • LED Indicator Shows Charging Status
  • Red Rear Light on Battery Pack for Safety Indication
  • Replaceable Li-ion Rechargeable Battery enables
  • the Use of Spare Battery
  • Attach to Industrial Helmet by Headband Helmet Clips [Optional]
  • Regulated Circuit with Protection from Over-charging & Over-discharging
  • - 2m Drop-proof
  • - IP64 Dust Proof and Waterproof
  • Operation
  • Headlight
    HIGH > MED > LOW > 8Hz FLASHING > OFF [Press OFF if stays at any mode over 3 seconds, press again to return HIGH]
    TO SELECT BOOST MODE
    When any light mode is on, press and hold the operation button to activate BOOST mode.
    BOOST will stay on when the button is being pressed on and will last for a maximum of 10 seconds. Return to last selected lighting mode when the button is released.
    Rear Light
    ON > 2Hz FLASHING > OFF

  • Battery Type
  • 1 x 3.7V 2600mAh 18650 Li-ion Rechargeable Battery
    [Included]

  • Charging Info
  • 4hrs Charging Time
    Red LED ON – Charging
    Green LED ON – Fully Charged

  • Battery Cycle
  • 300 cycles (Reserves ~70% Capacity after 300 cycles)

  • Bulb Type
  • 1 x Hi-Power White LED

  • Accessories
  • USB-C Cable [Included]
    For Industrial Helmet Headband Helmet Clips [RV0020, Order Separately]

  • Size
  • Headlight: 32mm x 71mm x 34mm
    Battery Case: 38mm x 102mm x 35mm

  • Weight
  • 178g [With Battery]

ANSI
BOOST 490lm 2644cd 103m NA
HIGH 350lm 1795cd 85m 11h
MED 170lm 880cd 59m 19h
LOW 25lm 129cd 23m 65h
8Hz FLASHING* NA NA NA 14h
ON NA NA NA 40h
2Hz FLASHING* NA NA NA 115h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.