Handheld

Headlight

Lantern

Industrial Light

Bike Light

Gadget

PH82C1N012

Li-ion / 300lm / 11h

Gen-2 Moonbeam Focus ControlRechargeable Headlight with 300lm Dense Output

Available in 1 colour
  • SPOT AND FLOOD BEAM
  • red rear light
Charging Status Indicator
  • free projection angle
  • Attach to Helmet by Clips [Optional Accessory]
Features -
Specifications +
ANSI +
  • Hi Power White LED - Up to 300 Lumens
  • LED Adjustable Beam by a Convenient 90o twist
  • Spot Beam for Distance Lighting; Flood Beam for Close Vision
  • 4 Lighting Modes - HIGH, MEDIUM, LOW & 2Hz FLASHING
  • Red Rear Light for Effective Safety Alert
  • Direct Plug to Recharge by Micro USB
  • LED Indicator shows Charging Status
  • Regulated Circuit with Protection from Over-charging & Over-discharging
  • Replaceable Li-ion Rechargeable Battery enables the Use of Spare Battery
  • Rock-solid Protection: 2m Drop-proof, IP64 Dust Proof & Water Resistant
  • Attach to Industrial Helmet by Headband Helmet Clips [Optional]
  • Colour

    • Grey

  • Operation

    • Headlight
    HIGH > MED > WHITE LOW > 2Hz FLASHING > OFF
    [Twist the aluminium ring for LED FOCUS CONTROL]
    [Press OFF if stays at any mode over 10 seconds]

    Rear Light
    ON > 2Hz FLASHING > OFF

  • Battery Type

    • 1 x 3.7V 2600mAh 18650 Li-ion Rechargeable Battery [Included]

  • Charging Info

    • 4hrs Charging Time
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle

    • 500 cycles (Reserves ~70% Capacity after 500 cycles)

  • Bulb Type

    • 1 x Hi Power White LED

  • Accessories

    • Micro USB Cable [Included]
    For Industrial Helmet
    Headband Helmet Clips [RV0020, Optional]

  • Size

    • Headlight 79mm x 44mm x 38mm
    Battery Case 102mm x 38mm x 35mm

  • Weight

    • 210g [With Battery]

ANSI
HIGH 300 Lumens 5000cd 140m 11h
MED 150 Lumens 2450cd 100m 26h
LOW 30 Lumens 500cd 44m 90h
2Hz FLASHING* NA NA NA 14h
REAR LIGHT ON NA NA NA 40h
2Hz FLASHING* NA NA NA 115h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.

You may also like