3AAA or Li-polymer / 320lm / 5.5h

Gen-2 Moonbeam Focus Control & Motion Sensor Headlight, Dual Fuel with Rec. Battery Pack or 3AAA Alkaline Batteries

Available in 1 colour
  • LED Focus Control Illumination
  • Motion Sensor Stand-by Mode ON
Wave Hand for ON/OFF
  • Alkaline or Rechargeable Battery Pack Compatible
  • Free Projection Angle
  • Hi Power White LED - Up to 320 Lumens
  • Adjustable Spot-to-Flood Beam by Twisting Lens Ring
  • Generation 2 Lens projects Uncompromising Spot & Flood Beam
  • Intelligent Motion Sensor Remote Control when Hands are Dirty or Wearing Glove, like Fishing, Climbing and Working
  • 4 Lighting Modes - HIGH, MED, LOW & 2Hz FLASHING
  • Smooth Dimming Control for SENSOR MODE [100%-5% Brightness]
  • Runs on either 3pcs AAA Size Alkaline Batteries [Included] or Li-polymer Rechargeable Battery Pack [Not Included]
  • Replaceable Rechargeable Battery Pack as Backup Power
  • Slim Compact Design, at 108g Weight Only
  • Rock-solid Protection
  • 2m Drop-proof
  • IP64 Dust Proof & Water Resistant
  • Operation
  • SENSOR MODE (long press to adjust brightness level) > HIGH > MED > LOW > 2Hz FLASHING > OFF

    [Blue LED Indicator will light up to indicate the stand-by status of Motion Sensor Operation]
    [At SENSOR MODE, press and hold the Operation Button to cycle through 100%-5% output level (blinks at brightest & dimmest output), release any time for desired brightness]
    [Wave hand in front of the Motion Sensor slowly to cycle through ON and OFF at selected Brightness Level]
    *IR does not work with black rubber materials
    [Twist lens ring for WHITE LED FOCUS CONTROL]
    [Press OFF if stays at any mode over 5 seconds]

  • Battery Type
  • 3 x 1.5V AAA Alkaline Batteries [Included] or 1 x 3.7V 800mAh Li-polymer Rechargeable Battery Pack [Not Included]

  • Bulb Type
  • 1 x Hi Power White LED

  • Size
  • 67mm x 46mm x 45mm

  • Weight
  • 108g [With Batteries]

HIGH 320 Lumens 5785cd 150m 5h30min
MED 145 Lumens 2575cd 100m 13h
LOW 18 Lumens 310cd 35m 60h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.