PHM0M1N001

Li-ion / 120lm / 5h


Going Light! Compact & Innovative Rechargeable HeadlightMade To Light Up Sports & Outdoor Adventures


Available in 3 colours
  • dual lighting sources
  • battery power indicator
series line up
  • battery power indicator
  • Free Projection Angle
  • Hi Power White LED - Up to 120 Lumens
  • Additional 3mm Red LEDs for Night Vision
  • Slim & Lightweight Design Offers Optimal Comfort on Head Appeal for Joggers, Trekkers & Adventurers
  • Innovative Diffusing Beam Effect on Red Rear Light Enhances Safety Indication in Cool Way
  • Switch Protection - Long Press for ON
  • Gradual On/Off - Turns On/Off Gradually
  • Battery Indication On-demand by 2 Different Flashing Patterns on Rear Light
  • Direct Plug to Recharge by Micro USB
  • LED Indicator Shows Charging Status
  • Regulated Circuit with Protection from Over-charging & Over-discharging
  • Water Resistant
  • Operation
  • Headlight
    WHITE HIGH > WHITE LOW > RED ON > RED 2Hz FLASHING
    > OFF
    [Long Press for ON]
    [Press OFF if stays at any mode over 3 seconds]
    Rear Light
    ON > PULSE FLASHING > OFF
    [Long Press for ON]
    [Press OFF if stays at any mode over 3 seconds]

  • Battery Type
  • 1 x 3.7V 600mAh 14430 Li-ion Rechargeable Battery [Included]

  • Charging Info
  • 2hrs Charging Time
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle
  • 500 Cycles

  • Battery Power Indicator
  • [3 Clicks on Rear Light Operation Button]
    High Power - CONSTANT FLASHING for 10 seconds
    Low Power - RANDOM BEAT FLASHING for 10 seconds

  • Bulb Type
  • 1 x Hi Power White LED
    2 x -3mm Red LEDs

  • Accessory
  • Micro USB Cable

  • Size
  • Headlight 31mm x 68mm x 28mm
    Battery Case 30mm x 87mm x 29mm

  • Weight
  • 77g [With Battery]

ANSI
HEADLIGHT WHITE HIGH 120 LUMENS 1180cd 68m 5h
HEADLIGHT WHITE LOW 12 LUMENS 110cd 21m 23h
HEADLIGHT RED ON 3 LUMENS 4cd 4m 23h
HEADLIGHT RED 2Hz FLASHING NA NA NA 50h
REAR LIGHT ON NA NA NA 11h
REAR LIGHT PULSE FLASHING NA NA NA 29h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.