PHM0M1N020

Li-polymer or 3AAA / 520lm / 2.5h


Gen-2 Moonbeam Focus Control Headlight,Dual Fuel with Rec. Battery Pack or 3AAA Alkaline Batteries


Available in 1 colour
  • LED Focus Control Illumination
  • Dual Light Sources
LINE UP
  • 2 Optics Lens
  • Free Projection Angle
  • Hi Power White LED - Up to 520 Lumens
  • Adjustable Spot-to-Flood Beam by Twisting Lens Ring
  • Generation 2 Lens projects Uncompromising Spot & Flood Beam
  • Additional 0.5W Nichia Red LED with Diffuser Lens for Close Vision or Night Vision
  • 5 Lighting Modes satisfy Different Lighting Needs: White LED - HIGH, MED & LOW; Red LED - ON & 2Hz FLASHING
  • Runs on either Li-polymer Rechargeable Battery Pack [Included] or 3pcs AAA Size Alkaline Batteries [Not Included]
  • Direct Plug to Recharge Battery Pack by Micro USB
  • LED Indicator on Recharge Battery Pack shows Charging Status
  • Circuit Protection prevents Battery from Over-charging or Over-discharging
  • Replaceable Rechargeable Battery Pack as Backup Power
  • Slim Compact Design, at 95g Weight Only
  • IP64 Dust Proof & Water Resistant
  • Colour
  • Black

  • Operation
  • WHITE HIGH > WHITE MED > WHITE LOW > RED ON > RED 2Hz FLASHING > OFF
    [Twist lens ring for WHITE LED FOCUS CONTROL]
    [Press OFF if stays at any mode over 10 seconds]

  • Battery Type
  • 1 x 3.7V 800mAh Li-polymer Rechargeable Battery Pack [Included] or 3 x 1.5V AAA Alkaline Batteries [Not Included]

  • Charging Info
  • 2.5hrs Charging Time [DC5V 620mA Input]
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle
  • 300 cycles (Reserves ~80% Capacity after 300 cycles)

  • Bulb Type
  • 1 x Hi Power White LED
    1 x 0.5W Nichia Red LED

  • Accessory
  • Micro USB Cable [Included]

  • Size
  • 62mm x 41mm x 43mm

  • Weight
  • 95g [With Rechargeable Battery Pack]

ANSI
WHITE HIGH 520 Lumens 8127cd 180m 2h30min
WHITE MED 230 Lumens 3596cd 120m 6h
WHITE LOW 25 Lumens 414cd 41m 23h
RED ON 5 Lumens 7cd 5m 20h
RED 2Hz FLASHING* NA NA NA 30h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.