PHM0M1N035

Li-ion or 1AA / 275lm / 4.5h


275lm Spot and High CRI Flood lighting Headlight,Dual Fuel with Rec. Battery or 1AA Alkaline Battery


Available in 1 colour
SPOT AND FLOOD BEAM
  • Alkaline or Rechargeable Battery Pack Compatible
  • 1 x Hi Power White LED - Up to 275 Lumens
  • 2 Separate buttons for Easy Operation of Spot & High CRI Flood beam
  • Projects Uncompromising Spot & High CRI Flood Beam
  • 5 Lighting Modes - SPOT HIGH, SPOT MED, SPOT LOW, FLOOD ON & FLOOD 3Hz FLASHING
  • Runs on either Li-ion Rechargeable Battery [Included] or 1pc AA Size Alkaline Battery [Not Included]
  • Direct Plug to Recharge Battery with Built-in-Charging by USB-C
  • LED Indicator on Recharge Battery shows Charging Status
  • Circuit Protection prevents Battery from Over-charging or Over-discharging
  • Replaceable Rechargeable Battery as Backup Power
  • Rock-solid Protection
  • 2m Drop-proof
  • IP64 Dust Proof & Water Resistant
  • Operation
  • Press Separate Buttons enabling Independent Control over SPOT and High CRI Flood Beam Operation.

    SPOT Beam Operation
    SPOT HIGH > SPOT MED > SPOT LOW > OFF

    High CRI Flood Beam Operation
    FLOOD ON > FLOOD 3Hz FLASHING > OFF
    [Press OFF if stays at any mode over 5 seconds]
    [Mode changing between SPOT and FLOOD beam will be returned to HIGH mode]

  • Battery Type
  • 1 x 3.7V 14500 1000mAh Li-ion Rechargeable Battery with Built-in-Charging1 [Included] Or 1 x 1.5V AA Alkaline Batteries [Not Included]

  • Charging Info
  • 2.5hrs Charging Time
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle
  • 300 cycles (Reserves ~80% Capacity after 300 cycles)

  • Bulb Type
  • 1 x Hi Power White LED
    1 x Flood LED

  • Accessory
  • USB-C Cable [Included]

  • Size
  • 69mm x 45mm x 35mm

  • Weight
  • 78g [With Rechargeable Battery]

ANSI
SPOT HIGH 275 Lumens 3851cd 124m 4h30min
SPOT MED 135 Lumens 1818cd 85m 10h30min
SPOT LOW 45 Lumens 600cd 49m 34h
FLOOD ON 40 Lumens 21cd 9m 13h
FLOOD 3Hz FLASHING* NA NA NA 12h30min
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.