PLA0M6B002

6AA / 380lm / 12h


6AA-Cell Colour Changing LED Lantern, with Innovative Candle Light Mode


Available in 1 colour
  • BATTERY POWER INDICATION
  • As Downlight
LED Colour-Changing
  • Nichia Cool White LEDs & Warm White LEDs - Up to 380 Lumens
  • Colour Changing Outputs - Cool White, Natural White & Warm White
  • Smooth Dimming Control [HIGH - LOW Brightness] at Each Colour Output
  • Imitating Candle Light Flickering Mode
  • Battery Capacity Indication
  • Switch Protection - Long Press to Turn On
  • Gradual On/Off - Turns On/Off Gradually
  • Removable Cap allows Direct Illumination
  • Rubberized Handle secures Hold with Wet or Gloved Hand
  • Rubberized Housing enhances Impact Resistances
  • Built-in Recessed Hook at Lantern Base for Hanging as Downlight
  • Water Resistant
  • Operation
  • [Long Press for ON]
    NATURAL WHITE ON > COOL WHITE ON > WARM WHITE ON > CANDLE LIGHT
    [At each ON mode, press and hold the Operation Button to cycle through HIGH to LOW outputs (blinks at minimum output), release any time for desired brightness]
    [Press OFF if stays at any mode over 3 seconds]

  • Battery Type
  • 6 x 1.5V AA Alkaline Batteries [Included]

  • Battery Power Indicator
  • Shows Battery Power after Lantern being Turned ON
    Green LED ON - High Power
    Red LED ON - Medium Power
    Red LED FLASHING - Low Power

  • Bulb Type
  • 4 x 0.5W Nichia Cool White LEDs
    4 x 0.5W Nichia Warm White LEDs

  • Accessory
  • Carabiner

  • Size
  • Ø74mm x 158mm

  • Weight
  • 404g [With Batteries]

ANSI
NATURAL WHITE HIGH 380 LUMENS 100cd 20m 12h
NATURAL WHITE LOW 70 LUMENS 20cd 9m 75h
COOL WHITE HIGH 250 LUMENS 80cd 18m 24h
COOL WHITE LOW 50 LUMENS 15cd 8m 140h
WARM WHITE HIGH 160 LUMENS 50cd 14m 24h
WARM WHITE LOW 35 LUMENS 10cd 6m 140h
CANDLE LIGHT NA NA NA 80h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.