PHL2C1N008

Li-ion / 1000lm / 3h

1000lm Heavy Duty Li-ion Rechargeable Headlight, USB-C Charging

Available in 3 colours

SAFETY REAR LIGHT
ADVANCED HEAT SINK

EXTENSION CORD (OPTIONAL)

ATTACHED TO HELMET
DEEP REFLECTOR PRODUCES LONG FOCUSED BEAM

Features -

Specifications +

ANSI +

Hi Power White LED - Up to 1000 Lumens
Textured Reflector produces 230m Beam Throw
Electronic Switch - One-click Activation for 3 Brightness Levels & 3 Flashing Modes
Direct Plug to Recharge by USB-C
LED Indicator Shows Battery Capacity & Charging Status
Red Rear Light on Battery Case for Safety Indication
Detachable Battery Pack enables the Use of Spare Battery
Extension Cord for Remote Battery Connection [Optional]
Regulated Circuit with Protection from Over-charging & Over-discharging
Holds Securely on Helmets by Helmets Clips Included
Water Resistant

Operation

Headlight
MANUAL OPERATION
[Short press for CONSTANT ON output; Long press for FLASHING output]
[At any mode of CONSTANT ON output, long press to switch to FLASHING output]

CONSTANT ON OUTPUT
HIGH > MED > LOW > OFF
FLASHING OUTPUT
8Hz FLASHING > 2Hz FLASHING > SOS-FLASHING > OFF
[Press OFF if stays at any mode over 3 seconds]

Rear Light
ON > 3Hz FLASHING > OFF

Battery Type

1 x 3.7V 2600mAh 18650 Li-ion Rechargeable Battery [Included]

Bulb Type

1 x Hi Power White LED

Size

Headlight 67mm x 44mm x 53mm
Battery Case 84mm x 49mm x 40mm

Weight

271g [With Battery]

ANSI
Headlight High	1000 Lumens	9624cd	196m	3h
Headlight - Med	500 Lumens	4652cd	136m	8h30min
Headlight - Low	20 Lumens	208cd	29m	58h
Headlight - 8Hz Flashing	NA	NA	NA	14h
Headlight - 2Hz Flashing	NA	NA	NA	22h
Headlight - SOS Flashing	NA	NA	NA	24h
Rear Light - On	NA	NA	NA	42h
Rear Light - 3Hz Flashing	NA	NA	NA	80h

* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.

PHL2C1N008

Li-ion / 1000lm / 3h

You may also like