PHM0M1N017

Li-polymer or 3AAA / 250lm / 7h


Gen-2 Moonbeam Focus Control Headlight,Duel Fuel with Rec. Battery Pack or 3AAA Alkaline Batteries


Available in 1 colour
  • LED Focus Control Illumination
  • Dual Light Sources
LINE UP
  • 2 Optics Lens
  • Free Projection Angle
  • Hi Power White LED - Up to 250 Lumens
  • Adjustable Spot-to-Flood Beam by Twisting Lens Ring
  • Generation 2 Lens projects Uncompromising Spot & Flood Beam
  • Additional 0.5W Nichia Red LED with Diffuser Lens for Close Vision or Night Vision
  • 5 Lighting Modes satisfy Different Lighting Needs: White LED - HIGH, MED & LOW; Red LED - ON & 2Hz FLASHING
  • Runs on either Li-polymer Rechargeable Battery Pack [Included] or 3pcs AAA Size Alkaline Batteries [Not Included]
  • Direct Plug to Recharge Battery Pack by Micro USB
  • LED Indicator on Recharge Battery Pack shows Charging Status
  • Circuit Protection Prevents Battery from Over-charging or Over-discharging
  • Replaceable Rechargeable Battery Pack as Backup Power
  • Slim Compact Design, at 95g Weight Only
  • IP64 Dust Proof & Water Resistant
  • Colour
  • Black

  • Operation
  • WHITE HIGH > WHITE MED > WHITE LOW > RED ON > RED 2Hz FLASHING > OFF
    [Twist lens ring for WHITE LED FOCUS CONTROL]
    [Press OFF if stays at any mode over 10 seconds]

  • Battery Type
  • 1 x 3.7V 800mAh Li-polymer Rechargeable Battery Pack [Included] or 3 x 1.5V AAA Alkaline Batteries [Not Included]

  • Charging Info
  • 2.5hrs Charging Time [DC5V 620mA Input]
    Red LED ON - Charging
    Green LED ON - Fully Charged

  • Battery Cycle
  • 300 cycles (Reserves ~80% Capacity after 300 cycles)

  • Bulb Type
  • 1 x Hi Power White LED
    1 x 0.5W Nichia Red LED

  • Accessory
  • Micro USB Cable [Included]

  • Size
  • 62mm x 41mm x 43mm

  • Weight
  • 95g [With Rechargeable Battery Pack]

ANSI
WHITE HIGH 250 Lumens 3950cd 125m 7h
WHITE MED 115 Lumens 1700cd 80m 14h
WHITE LOW 10 Lumens 190cd 28m 45h
RED ON 10 Lumens 7cd 5m 15h
RED 2Hz FLASHING* NA NA NA 30h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.